Entryway, Leaded & Beveled Glass

SKU:
EENTR3
$6,349.99
Shipping:
Included

Description

This gorgeous entryway system features a visually striking leaded beveled glass transom and sidelights. It will fit in a minimum 7 3/8" deep, 80" wide, 115 1/8" tall opening. One side of the piece is painted white, while the opposing side is coated in oak molding with dark stain. The door measures 38 3/8"(W) x 85 1/8"(H), contains a 24 1/4"(W) x 35 1/2"(H) piece of glass in the upper half, and is painted white on both sides. It has beautiful carved filigree above a shield ornament on the lower molded panel of the white side of the entryway, while the reverse side has a simple molded panel. Equipped with ball hinges and a vintage Russwin closer on the white side of the entry, the door has a small metal pull handle on the same side. No locks or latches are equipped to the door. The beveled glass sidelights and transom are comprised of very thick glass with sturdy came. The glass in the sidelights measures 6 1/4"(W) x 61 1/4"(H) and each feature shield motifs against a diamond pattern background. The transom glass measures 72 1/2"(W) x 11 3/4"(H) and features a four-pointed star centered between lovely geometric patterns. Dentil molding runs along the header of the white side of the entry above simple pilaster-like components that run vertically along the edges of the sidelights. Ornate plaster capital appliques occupy the space between the header and the tops of the pilasters on the white side of the door. Unfortunately, the applique from the right side of the door is missing. The opposing side of the entryway has simple stained oak molding with egg and dart detailing running along the edges. This entryway is in good salvaged condition. The case molding is mostly intact with exception of the vertical pieces that flank the transom on both sides. The panels below both sidelights are missing on the stained side, in addition to broken molding present above the sidelights. The sills below the sidelights of the white side of the entry are both broken, one is still intact, while the other is missing. scuffing, scratching and general wear and tear consistent with use over an extended period is present throughout the piece. This entry was salvaged from the former Moose Lodge in Jamestown, New York. This building, built in the late 1800's, was previously the mansion of John and Sarah Galloway, parents of the fabled "Lady in Glass". In 1932, the property was acquired by the local Moose Lodge Chapter which incorporated multiple additions to the grand structure. This building, and items from it, are featured on Season 11, Episode 1, of the Diy Network show, "Salvage Dawgs". Weight: 700 lbs. Item Measurements: 80(L) x 10.25(W) x 114(H)

Extra Information

Type:
Vintage