Eaton Cutler Hammer Switchboard Cabinet - 2 Panelboards, Pow-R-Line C

Manufactured in 2003 by Eaton Cutler Hammer, this is a Pow-R-Line C switchboard cabinet assembly. The upper half of the cabinet houses a pair of panelboards, a PRL1A board on the left and an RPL1A* on the right. Condition: The cabinet assembly is in good condition with minor cosmetic flawing such as scuffing, scratches, and small dents and dings throughout. This unit was functional prior to salvaging but is not guaranteed to work without repair or maintenance. Specs are listed below. Cabinet- Mn: Pow-R-Line C Year: 2003 208Y/120 Volt 3 Phase 4 Wire Left Panelboard- Mn: PRL1A 208Y/120 Volt 225 Amp 3 Phase 4 Wire Current Configuration: 1x ED65k Main Breaker 200A 240VAC 125VDC 3 Pole, 34x 20A 1 Pole Breakers, 1x 15A 2 Pole Breaker, 1x 20A 2 Pole Breaker, 1x 25A 1 Pole Breaker, 1X 100A 3 Pole Breaker Right Panelboard- Mn: RPL1A (POSSIBLE TYPO ON MFG INFOPLATE- likely PRL1A) 208Y/120V 100A 3Phase 4 Wire Current Configuration: ED65K Main Breaker 100A 240VAC 125VDC 3 Pole, 24x 20A 1 Pole, 1x 15A 2 Pole 1x 20A 3 Pole, 3x 20A 4 Pole This switchboard was salvaged from the Boulevard at the Capital Centre, a shopping center in Largo, Maryland. This mall and items from it are featured on Season 11, Episode 4, of the Diy Network show, "Salvage Dawgs". Weight: 470 lbs. Item Measurements: 37.125(L) x 18.75(W) x 90.5(H, add 2.75" for top fitting) As seen on Season 10, Episode 12. *POSSIBLE TYPO ON MFG INFOPLATE- likely PRL1A